eSID Software upgrade, MaptunerX

MaptunerX app for software update in eSID3

One update per purchase.

NOTE, requires OBD2 Split (Y) cable, not included.,

### eSID3 ###
- Added view to force DPF Regeneration, like the TECH2. (Z19)
- Added view for estimated XWD percentage (100% == All power to rear wheels)
- Added Active Limiter to Airmass view (B207)
- Added feature to remember the Extra Light Switch state the next driving cycle (No need to press the switch after every startup)
- Re-introduction of the TCS/ESP OFF switch (either from eSID3 Digital Input or use of the Extra Light Switch)
- Increased Misfire Counter Limit from 255 to 65535 (B284)
- Added more options to activate the 12V Digital Output:
- When Highbeam is active
- When Extra Light Relay is active
- When UnlockLight is active
- If 12V Digital output is configured to activate on RPM Threshold (Shift-up), it will only be activated when in ManualMode on AT-vehicles.
- Added configuration to use Extra Light Relay in engine compartment instead of eSID internal 12V digital output.
- Use case is to have a controllable relay in the engine compartment.
- Could be activated using the same parameters as the eSID 12V digital output (Engine speed threshold, eSID digital input switch, etc)
- Extended Welcome Message functionality to show these parameters for a few seconds directly after the welcome message:
- Clock, Odometer, Outside Temp and Crank Voltage.
- These are typical parameters that could be of interest in beginning of the driving cycle
- The four parameters are fixed, not configurable.
- Re-introduced "Engine" setting, if vehicle VIN does not match the current engine type.
- UnlockLight Max Time increased to 29 Minutes.
- Added Icon 'C' when Cruise Control is active.
- Fixed AutoFogLight bug.
- Added 12H/24H Time format when configuring clock on cars without OEM stereo.
https://youtu.be/lINOOv7A97Y
### eSID 03-06 Gen2 ###
- Actual Gear on Automatic Transmission cars now also shows direction during shifting and lockup in the Status View.
- Added Interior Temperature
- Added Fuel Pressure view (B284)
- Shiftup Icon will only be activated when in ManualMode on AT-vehicles.
- Added Text 'CC' when Cruise Control is active.
- Added feature to remember the Extra Light Switch state the next driving cycle (No need to press the switch after every startup)
- Auto start at 20km/h if any door was opened while vehicle was standstill (not only driver door).
- Fixed AutoFogLight bug.