eSID Software upgrade, MaptunerX

MaptunerX app for software update in eSID3 One update per purchase. NOTE, requires OBD2 Split (Y) cable, not included., ### eSID3 ### - Added view to force DPF Regeneration, like the TECH2. (Z19) - Added view for estimated XWD percentage (100% == All power to rear wheels) - Added Active Limiter to Airmass view (B207) - Added feature to remember the Extra Light Switch state the next driving cycle (No need to press the switch after every startup) - Re-introduction of the TCS/ESP OFF switch (either from eSID3 Digital Input or use of the Extra Light Switch) - Increased Misfire Counter Limit from 255 to 65535 (B284) - Added more options to activate the 12V Digital Output: - When Highbeam is active - When Extra Light Relay is active - When UnlockLight is active - If 12V Digital output is configured to activate on RPM Threshold (Shift-up), it will only be activated when in ManualMode on AT-vehicles. - Added configuration to use Extra Light Relay in engine compartment instead of eSID internal 12V digital output. - Use case is to have a controllable relay in the engine compartment. - Could be activated using the same parameters as the eSID 12V digital output (Engine speed threshold, eSID digital input switch, etc) - Extended Welcome Message functionality to show these parameters for a few seconds directly after the welcome message: - Clock, Odometer, Outside Temp and Crank Voltage. - These are typical parameters that could be of interest in beginning of the driving cycle - The four parameters are fixed, not configurable. - Re-introduced "Engine" setting, if vehicle VIN does not match the current engine type. - UnlockLight Max Time increased to 29 Minutes. - Added Icon 'C' when Cruise Control is active. - Fixed AutoFogLight bug. - Added 12H/24H Time format when configuring clock on cars without OEM stereo. https://youtu.be/lINOOv7A97Y ### eSID 03-06 Gen2 ### - Actual Gear on Automatic Transmission cars now also shows direction during shifting and lockup in the Status View. - Added Interior Temperature - Added Fuel Pressure view (B284) - Shiftup Icon will only be activated when in ManualMode on AT-vehicles. - Added Text 'CC' when Cruise Control is active. - Added feature to remember the Extra Light Switch state the next driving cycle (No need to press the switch after every startup) - Auto start at 20km/h if any door was opened while vehicle was standstill (not only driver door). - Fixed AutoFogLight bug.