Clutch Kit pDrive Ski-doo/Lynx 850 Turbo 2020-

The best variator kit on the market for the BRP 850 TURBO. BilletX Variator Kit “MADE IN SWEDEN” Specially developed by BilletX for BRP 850 Turbo & Turbo R machines equipped with MAPTUN Stage 1, 2, and Stage 2 + JAWS turbo pipe -The variator kit handles power from 186 to 220+ hk. Fits Ski-Doo / LYNX 850 TURBO & Turbo R. Also compatible with MAPTUNE Stage 1, Stage 2, and Stage 2 + JAWS Turbo, and all the way up to 250 hk - BRP 850 TURBO Gen 5 Variator Kit. - BilletX Adjustable Weight Arms (3 pcs.). - Magnets (24 pcs.) weighing 1.5 g each. - Stainless steel weight washers for the pivot bolt (9 pcs., 1.5 g each). - BilletX QRS Helix 48/40 - Primary spring 200–330 - Secondary spring 215–380 Compared to an original setup, the BilletX variator kit provides quicker throttle response, excellent backshift, and more acceleration. + You can easily adjust your variator to match your tuning level, from 186 to 220+ hk. Settings: Setup Weights: Turbo Stage 1 Approx. 186 hk = 91–92 g (Hole 1 = Closest to the weight pin) 1: 1 2: 2 The pivot bolt is weighted with 2 (up to 3) of the included washers. (The washers are very easy to add or remove once the variator is mounted on the snowmobile.) Recommended total starting weight = 91 g - We recommend purchasing a small scale with 0.01-gram resolution when adjusting the weight yourself. Setup Weights: Turbo “R” Stage 1 Approx. 194 hk = 92 g (Hole 1 = Closest to the weight pin) 1: 1 2: 3 The pivot bolt is weighted with 2 (up to 3) of the included washers. (The washers are very easy to add or remove once the variator is mounted on the snowmobile.) Recommended total starting weight = 91 g -We recommend purchasing a small scale with 0.01-gram resolution when adjusting the weights yourself. MAPTUNE Setup Stage 2: Turbo / Turbo R approx. 203 hk = 93.5 g (Hole 1 = Closest to the weight pin) 1: 1 2: 4 Weigh the pivot bolt using 2 (for a total of 3) of the included washers. (The washers are very easy to add or remove once the variator is mounted on the snowmobile) Recommended total starting weight = 94g MAPTUNE Setup Step 2: Turbo R + JAWS pipe = approx. 220hk = 97g (Hole 1 = Closest to the weight pin) 1: 2 2: 4 The pivot bolt is weighted with 3 of the included washers. (The washers are very easy to add or remove once the variator is mounted on the snowmobile) Recommended total starting weight = 97g Good to know. - More weight at the top will increase the redline and provide a higher gear ratio and higher top speed. - More weight at the heel will lower the redline and provide more acceleration and mid-range power. - More weight generally lowers the redline, while less weight raises it. Translated with DeepL.com (free version)